It is 12v Underwater Waterproof LED Light Bar RGB for Offroad features and appearance that differentiates it from other products in the market. We pay close attention to the selection of raw materials and the use of manufacturing technologies. In this way, the quality and performance of Led automobile light Led rock light Led whip light led wheel light Led headlight Led motorcycle light Led boat light Led wire connector Led controller can be better guaranteed. High-end technologies are used to manufacture 12v Underwater Waterproof LED Light Bar RGB for Offroad.The product can play out its greatest effect in the field(s) of Auto Lighting System. 12v Underwater Waterproof LED Light Bar RGB for Offroad is not only manufactured to draw the attention of people but also to bring them convenience and benefits. Designed by creative designers, Led automobile light Led rock light Led whip light led wheel light Led headlight Led motorcycle light Led boat light Led wire connector Led controller presents a style of aesthetics. In addition, it is excellent characterized thanks to the adopted high-quality raw materials and high-end technologies.
|Model:||Universal, 2011-2013||Car Fitment:||Universal|
|Warranty:||12 Months||Place of Origin:||Guangdong, China|
|Model Number:||KT23324||Brand Name:||KS|
|Car Model:||Major Car||Voltage:||12V|
|Color:||Yellow||Product name:||LED Car Headlight|
Warning: The installation of this kit is recommended to be installed by a licensed professional. The improper installation of this kit will void all warranties.
Please read the following instructions thoroughly before installing this kit.
1. First using a tape measure, measure the lip under your bike to ensure there is enough clearance to mount your tail light bar, each of bike need two strip for right and left signals.
2. Following your bikes owner’s manual, carefully remove the parts from your bike if necessary.
3. Loose & route the wires to the place where planed to mounting the controller, using the supplied zip ties to secure the wire to their mounting points.
4. Double checked the mounting place is clean and dry, carefully peel back the edge of the adhesive baking on the connector end, place the LED strips on the clean and dry mounting place, use the supplied zip ties at each end of the strips to act as a secondary anchor and mounting point for each. The zip ties are a very important step and should not be skipped. They will help ensure that the lighting strips stay adhered and in place during vehicle use and trough seasonal temperature changes.
5. Route the Red & Black power wire from the Left signal switch, Connect and secure the power supply lines only after everything is properly installed and mounted.
6. Route the Red & Black power wire from the Left signal switch, Connect and secure the power supply lines only after everything is properly installed and mounted.
7. Then you turn on the bike and switch to left Flashing light, the original left signal light flashing, the strip scanning from right to left, when you switch to right Flashing light, the original right signal light flashing, the strip scanning from left to right.
8. The light have to connect to the flasher switch of the vehicle
Wire Connector Diagram:
Black Wire: Common Ground
Red Wire : DC 12V Positive
Brighter Than Expected
Extraordinary Waterproof Performance
|View More||View More||View More|
|LED Motorcycle Light >>||LED Automobile Light >>||LED Marine Light >>|
|LED Controller >>||LED Wire Connector >>||LED Strip Light Bar >>|
Shenzhen Kingshow Star Technology Co., Limited was established in shenzhen and our factory is located in Shenzhen, China. King Show covers an area of 6,000 square meters and has about 400 employees, including 30 highly qualified staff members of specialists and engineers. We are a high-tech manufacturer specialized in led motorcycle light kit ,led auto/under light kit ,custom and normal LED strips, LED lamps, LED spotlights, LED bulbs, car lamps, wall washers, down lights, bedside lamps and other related LED products. Most of our products have CE and RoHS certificates. More than 90 percent of our products are delivered to Europe, North America and Australia.
King Show can satisfy your customized needs with our unparalleled advantages. We have been concentrating on the development, design and production of various electrical lighting appliances, such as automobile exquisite articles and colorful LED with professional technique, and we have been keeping good and direct business cooperation with the best LED chip suppliers in the USA and South Korea. Taking quality as priority, our QC staff members inspect all products piece by piece before delivery. Adequate tests must be conducted. We ensure that our products have good designs and top quality.
Why choose us:
1) High Quality; 2) Quick Delivery; 3) Lowest Cost; 4) High Turnover; 5) High Efficiency; 6) Customers' Satisfaction
Our objective is to establish a long-term and steady relationship with you and we hope to become your reliable cooperative partner.Click to See Factory:https://