DIY Installation of Wheel LED Lights: A Step-by-Step Guide



Are you looking to add a touch of style and personality to your vehicle? Installing wheel LED lights can completely transform the look of your car and make it stand out from the crowd. Adding a vibrant glow to your wheels not only enhances the overall appearance of your vehicle but also increases visibility and safety on the road. If you're up for a fun and easy DIY project, this step-by-step guide will walk you through the process of installing wheel LED lights. With just a few tools and some basic knowledge, you'll be able to achieve a captivating lighting display that will turn heads wherever you go.

What You'll Need:

Before we delve into the installation process, it's important to gather all the necessary tools and materials. Here's a list of what you'll need:

1. Wheel LED light kit:

Choose a high-quality, weatherproof LED light kit specifically designed for wheels. Look for options that offer different color options, patterns, and wireless control for maximum customization.

2. Mounting brackets:

These brackets will securely hold the LED lights in place on your wheel hub.

3. Adhesive tape:

Opt for strong adhesive tape that is weather-resistant to ensure the lights stay in place.

4. Wire connectors:

These connectors will help you create a solid electrical connection between the LED lights and the power source.

5. Electrical tape:

Use electrical tape to secure the wire connections and protect them from moisture.

6. Wire strippers:

These tools will be used to remove the insulation from the wires for proper connection.

7. Zip ties:

Zip ties will come in handy for organizing and securing the wiring.

Now that you have all the necessary tools and materials, let's move on to the step-by-step installation process.

The Installation Process:

Choose the Placement

The first step is to determine where you want to place the LED lights on your wheels. You have the option to either mount them on the wheel hub or on the brake caliper. Mounting the lights on the wheel hub is a popular choice as it provides a more even distribution of light. However, if you want a more intense and focused illumination, mounting them on the brake caliper might be the better choice. Consider the design of your wheels and personal preference before finalizing the placement.

Once you've decided on the placement, thoroughly clean the area to ensure proper adhesion of the mounting brackets and adhesive tape. Use a mild detergent and water solution to remove any dirt, grime, or brake dust. Dry the area completely before moving on to the next step.

Secure the Mounting Brackets

Take the mounting brackets and attach them to the desired location on the wheel hub or brake caliper. Ensure that they are firmly secured and positioned correctly to allow the LED lights to face outward.

Using the provided screws or adhesive backing, attach the brackets securely to the wheel hub or brake caliper. Double-check that they are tightly fastened to prevent any movement or damage to the lights while driving. Make sure to follow the manufacturer's instructions for mounting the brackets correctly, as methods may vary depending on the brand and model of your LED light kit.

Connect the Wiring

Now it's time to connect the wiring of the LED lights. Start by identifying the positive (+) and negative (-) wires on both the LED lights and the power source. The positive wire is usually marked with a red stripe, while the negative wire is plain.

Using wire strippers, carefully remove about half an inch of insulation from the end of each wire. This exposed portion will be used for the wire connections. Take one LED light wire and one power source wire of the same polarity, and twist their exposed ends together. Insert a wire connector over the twisted ends and crimp it securely to create a solid connection.

Repeat this process for all the remaining wires, making sure to connect the positive to positive and negative to negative. Once all the wires are connected, use electrical tape to wrap each connection tightly and secure them from moisture.

Organize the Wiring

With the connections made, it's important to organize and secure the wiring to prevent any damage or interference while driving. Start by bundling the wires together and using zip ties to hold them in place. Be careful not to overtighten the zip ties to avoid damaging the wires.

Route the bundled wiring along the inner side of the wheel, following the existing wiring routes if possible. Use zip ties to attach the wiring to the suspension components or wheel wells to keep it secure and tidy. It's crucial to keep the wiring away from any moving parts, as well as heat sources such as the exhaust system or braking components.

Attach the LED Lights

Now that the wiring is neatly organized, it's time to attach the LED lights to the mounting brackets. Peel off the adhesive backing from the lights and press them firmly against the brackets. Ensure they are centered and aligned correctly before applying pressure to ensure a strong bond.

Once the LED lights are attached, give them a gentle tug to ensure they are securely in place. If any lights feel loose, apply additional adhesive or consider using zip ties for extra reinforcement.

Finishing Touches

With the LED lights successfully installed, all that's left is to clean up and make any final adjustments. Double-check all the connections and wires to ensure they are secure and protected. Trim any excess zip ties for a clean and professional look.

Before hitting the road, test the lights to verify that they are functioning properly. Use the provided remote control or wireless app to switch between different colors and lighting patterns to find the one that suits your style.


Installing wheel LED lights is a fantastic way to add a touch of flair to your vehicle. With the step-by-step guide outlined above, you can easily transform your wheels into eye-catching light displays. Remember to gather all the necessary tools and materials before starting the installation process. Choose a suitable placement for the LED lights, secure the mounting brackets, connect the wiring, organize and secure the wires, attach the lights, and make any final adjustments. Always follow the manufacturer's instructions and exercise caution while working with electrical components.

By following this comprehensive guide, you'll be able to achieve a professional-looking installation that will make your wheels the envy of the town. So, gear up and get ready to turn heads with your dazzling wheel LED lights. Happy installing!


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
Current language:English